Reductive Fractionation of Flax Shives in Ethanol Medium over RuNi Bimetallic Catalysts.

The reductive catalytic fractionation of flax shives in the presence of bimetallic NiRu catalysts supported on oxidized carbon materials (CM) such as mesoporous Sibunit and carbon mesostructured by KAIST (CMK-3) was studied. The catalysts based on CMK-3 were characterized by a higher surface area (1216 m2/g) compared to the ones based on Sibunit (315 m2/g). The catalyst supported on CMK-3 (10Ni3RuC400) was characterized by a more uniform distribution of Ni particles, in contrast to the Sibunit-based catalyst (10Ni3RuS450), on the surface of which large agglomerated particles (300-400 nm) were presented. The bimetallic catalysts were found to be more selective towards propanol-substituted methoxyphenols compared to monometallic Ru/C and Ni/C catalysts. A high yield of monomers (up to 26 wt%, including 17% 4-propanol guaiacol) was obtained in the presence of a 10Ni3RuC400 catalyst based on CMK-3.

Preparation and Characterization of di- and Tricarboxylic Acids-Modified Arabinogalactan Plasticized Composite Films.

To ensure the high quality of water, it is necessary to remove toxic pollutants. At present, purification of water is implemented using various sorbents. The efficient sorption materials are modified polysaccharides. In this study, we report on a new environmentally friendly method for modifying larch hemicellulose-arabinogalactan (AG)-with polybasic carboxylic acids (citric, succinic, oxalic, and adipic) to obtain composite materials. The synthesized AG derivatives have been explored by a complex of physicochemical methods, including gel permeation chromatography (GPC), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray diffractometry (XRD), scanning electron microscopy (SEM), and sorption capacity investigations. It is shown that the heat treatment results in the formation of additional inter- and intramolecular bonds between carboxylic acids and polysaccharide molecules. The formation of ester bonds has been confirmed by the appearance of absorption bands in the IR spectra in the range of 1750-1690 cm-1. It has been found, using the TGA study, that the most thermally stable (up to 190 °C) sample is arabinogalactan oxalate obtained under heat treatment. The SEM study of the synthesized AG films has shown that the modified samples have the homogeneous film surface ensured by cross-linking. It has been established, when studying the sorption properties of the AG derivatives, that AG succinate (82.52%) obtained by lyophilization has the highest sorption capacity, due to the developed mesoporous surface, which, in turn, makes the synthesized films promising eco-friendly materials for use as drug carriers, sorbents, and water treatment agents.

Sulfation of Birch Wood Microcrystalline Cellulose with Sulfamic Acid Using Ion-Exchange Resins as Catalysts.

Cellulose sulfates are important biologically active substances with a wide range of useful properties. The development of new methods for the production of cellulose sulfates is an urgent task. In this work, we investigated ion-exchange resins as catalysts for the sulfation of cellulose with sulfamic acid. It has been shown that water-insoluble sulfated reaction products are formed in high yield in the presence of anion exchangers, while water-soluble products are formed in the presence of cation exchangers. The most effective catalyst is Amberlite IR 120. According to gel permeation chromatography, it was shown that the samples sulfated in the presence of the catalysts KU-2-8, Purolit s390 plus, and AN-31 SO42- underwent the greatest degradation. The molecular weight destribution profiles of these samples are noticeably shifted to the left towards low-molecular-weight compounds with an increase in fractions in the regions Mw ~2.100 g/mol and ~3.500 g/mol, indicating the growth of microcrystalline cellulose depolymerization products. The introduction of a sulfate group into the cellulose molecule is confirmed using FTIR spectroscopy by the appearance of absorption bands at 1245-1252 cm-1 and 800-809 cm-1, which correspond to the vibrations of the sulfate group. According to X-ray diffraction data, amorphization of the crystalline structure of cellulose is observed during sulfation. Thermal analysis has shown that with an increase in the content of sulfate groups in cellulose derivatives, thermal stability decreases.

New Azo Derivatives of Ethanol Lignin: Synthesis, Structure, and Photosensitive Properties.

Water-soluble azo derivatives of lignin were synthesized by the azo coupling reaction using organosolv ethanol lignin and diazonium salts based on sulfanilic acid and p-nitroaniline. The structure of azo derivatives of lignin were studied by nuclear magnetic resonance, Fourier-transform infrared spectroscopy, and gel permeation chromatography. It was found that the azobenzene bonds formed in the azo coupling reaction of macromolecules impart the photosensitive properties to the synthesized polymers via cis-trans photoisomerization of the diazobenzene group. It was shown experimentally that the synthesized polymers exhibited good solubility both in the aqueous media in a wide (2-12) pH range and in DMSO and THF organic solvents, which opens up new prospects for their application.

Larix Sibirica Arabinogalactan Hydrolysis over Zr-SBA-15; Depolymerization Insight.

Arabinogalactan depolymerization over solid Zr-containing SBA-15-based catalyst was studied via HPLC, GPC, and theoretical modeling. Arabinogalactans (AG) are hemicelluloses mainly present in larch wood species, which can be extracted on an industrial scale. The application of solid acid catalysts in the processes of hemicellulose conversion can exclude serious drawbacks such as equipment corrosion, etc. Characterization of 5%Zr-SBA-15 confirmed the successful formation of the mesoporous structure inherent to SBA-15 with fine Zr distribution and strong acidic properties (XRD, XPS, FTIR, pHpzc). Carrying out the process at 130 °C allowed us to achieve total products yield of up to 59 wt%, which is represented mainly by galactose (51 wt%) and minor (less than 9 wt%) presence of arabinose, furfural, 5-HMF, and levulinic acid. The temperature increases up to 150 °C resulted in a total product yield drop down to 37 wt%, making temperature elevation above 130 °C obsolete. According to the theoretical investigations, arabinogalactan depolymerization follows the primary cleavage of the ß(1→3) bonds between the D-galactose units of the main chain, which is also confirmed by GPC.

Composition and Structure of Aspen (Pópulus trémula) Hemicelluloses Obtained by Oxidative Delignification.

In this study, hemicelluloses of aspen wood (Pópulus trémula) were obtained by oxidative delignification in an acetic acid-water-hydrogen peroxide medium at temperatures of 70-100 °C and a process time of 1-4 h. The maximum polysaccharide yield of up to 9.68 wt% was reported. The composition and structure of the hemicelluloses were studied using a complex of physicochemical methods: gas and gel permeation chromatography, Fourier-transform infrared spectroscopy, 2D nuclear magnetic resonance spectroscopy, and thermogravimetric analysis. The xylose, mannose, galactose, and glucose monomer units were identified in the hemicelluloses by gas chromatography. The weight average molecular weight Mw of the products determined by gel permeation chromatography was found to range within 8932-33,142 g/mol. The reported Fourier-transform spectra of the hemicelluloses contain all the bands characteristic of heteropolysaccharides; a weak lignin absorption signal in the spectra at 1500-1510 cm-1 is attributed to a minor content of phenolic fragments in the structure of the obtained hemicelluloses. The use of thermogravimetric analysis established that the hemicelluloses isolated from aspen wood are resistant against heating to temperatures of up to 90-100 °C and, upon further heating up to 400 °C, start destructing at an increasing rate. The antioxidant activity of the hemicelluloses was examined using the compounds that mimic free radicals (1,1-diphenyl-2-picrylhydrazyl) and hydroxyl radicals (salicylic acid). It was found that the activity of all polysaccharides in neutralizing DPPH and hydroxyl radicals is lower than the absorption capacity of vitamin C at all the tested concentrations (0.5, 2, and 5 mg/mL) and attains 81.7 and 82.9%, respectively.

Acceleration by Double Activation Catalysis and its Negation with Rising Temperature in Hydrolysis of Cellobiose with Phthalic and Hydrochloric Acids.

Double activation catalysis was experimentally observed in hydrolysis of cellobiose catalyzed simultaneously with phthalic and hydrochloric acids, confirming earlier theoretical prediction known from literature. Both acids can catalyze the reaction individually, and contribution of the double-activation pathway to the total reaction rate declines as temperature increases. In fact, above a certain temperature, the hydrolysis rate in presence of both acids becomes lower than the sum of the rates for the two acids acting individually. A kinetic model is proposed to explain this transition between double-activated catalysis and inhibition. The trend of declining contribution of cooperative catalytic pathway with rising temperature is theorized to be generally applicable for any reaction with a pathway involving simultaneous action of two catalysts when either of them can individually catalyze the reaction.